Add Additional Remote Control(S) To System - Toyota TVIP-RS3200 Programming Manual

TOYOTA TVIP SYSTEM PROGRAMMING
ADD ADDITIONAL REMOTE CONTROL(S) TO SYSTEM (continued)
3. Program (add) an additional remote control.
a. Press and release
both the LOCK and
UNLOCK buttons
on one remote
control at the same
time.
Note: Repeat the above steps to add additional remote controls.
4. Complete the programming steps.
a. Open the driver s door
* If the system activates the lights, buzzer and door locks 2 times, start over.
b. Press and release
the LOCK button.
c. The tail and marker lights flash 1 time, the
buzzer chirps 1 time, and the doors lock
and unlock 1 time.*
Page 3