Arm Without Additional Sensors; Automatic Re-Arming - Toyota VSS3-Hilux Owner's Manual

2.5. Arm without additional sensors

For example, if you have an inclination sensor, you need to deactivate it when you are travelling by
boat or train, or if you are parking in a car park served by lifts.
If your alarm system has additional sensors, you can deactivate them as follows:
Activation steps
1 Lock the car by the
remote control.
2 During the first
30 sec., press the
lock button again
twice.
Summary:
press the remote
3 times within
30 sec.
Note:
– The sensor is deactivated for 1 use only. Next time you arm the alarm, the sensor will be
activated again.

2.6. Automatic re-arming

If the car is unlocked using the remote control, and the boot or doors are not opened within
30 seconds, the security system will auto matically re-arm when the car automatically relocks.
8 VSS3
Hazard light
indication
Flashes once.
Flashes once.
Alarm status
light (LED)
On for 30 sec.
On for 30 sec.
Buzzer
1 beep sound if
buzzer enabled.
1 beep sound if
buzzer enabled.