Advertisement
TOYOTA TVIP SYSTEM PROGRAMMING
PASSIVE ARMING ON/ OFF SELECTION AND ENTRY DELAY TIME
SELECTION
The RS3200 PLUS is factory set to not passively arm. To change the system s operation for passive
arming, as well as to adjust the entry delay time, follow the procedure below.
1. Before you begin:
Close all the doors and the trunk or hatch, unlock all the doors with the inside
lock switch, then remove the key from the ignition switch.
2. Start the programming procedure. (Complete these steps within 30 seconds.)
a. Using a remote control,
lock, then unlock the
doors 3 times.
d. The system locks the door
in 2 seconds; if this does
not happen, start over.
3. Select the operating mode and entry time delay, and complete the programming steps.
a. Close, then open the door:
2 times= passive arming off
3 times= passive arming on,
0 sec. entry delay.
4 times= passive arming on,
15 sec. entry delay.
5 times= passive arming on,
30 sec. entry delay.
b. Open the driver s
door.
e. Unlock the driver s door
inside lock button.
b. Lock, then unlock the
driver s door inside
lock button 1 time.
Page 11
c. Lock, then unlock the
driver s door inside lock
button 3 times.
c. The system locks the door
in 2 seconds;
Programming is now
complete. If this does not
happen, start over.
Hide quick links:
Advertisement
