TOYOTA TVIP SYSTEM PROGRAMMING Page 1 PROGRAMMING TABLE OF CONTENTS RS3200 PROGRAMMING PAGE ADD ADDITIONAL REMOTE CONTROL(S) TO SYSTEM 2, 3 REPROGRAM EXISTING REMOTE CONTROLS 4, 5 REMOTE CONTROL FUNCTION SELECT 6, 7 CLEAR ALL REMOTE CONTROL CODES PASSIVE ARMING ON/ OFF SELECTION AND ENTRY DELAY TIME SELECTION IGNITION−CONTROLLED AUTOMATIC DOOR...
Page 2 TOYOTA TVIP SYSTEM PROGRAMMING−RS3200 ADD ADDITIONAL REMOTE CONTROL(S) TO SYSTEM Follow this procedure to add additional remote controls to a system. The RS3200 may be programmed to operate with a maximum of four remote controls. When a new remote controls is programmed, it will work in the default operation mode (press the UNLOCK button twice to unlock all doors and no AUX button function on 4 button remote controls);...
TOYOTA TVIP SYSTEM PROGRAMMING Page 3 ADD ADDITIONAL REMOTE CONTROL(S) TO SYSTEM (continued) 3. Program (add) an additional remote control. a. Press and release b. Press and release c. The tail and marker lights flash 1 time, the both the LOCK and buzzer chirps 1 time, and the doors lock the LOCK button.
Page 4 TOYOTA TVIP SYSTEM PROGRAMMING−RS3200 REPROGRAM EXISTING REMOTE CONTROLS Follow this procedure to clear all existing remote control codes and reprogram existing remote controls to a system. When existing remote controls are reprogrammed, they will work in the default operation mode (press the UNLOCK button twice to unlock all doors and no AUX button function on 4 button remote controls);...
Page 5
TOYOTA TVIP SYSTEM PROGRAMMING Page 5 REPROGRAM EXISTING REMOTE CONTROLS (continued) 3. Reprogram an existing remote control. a. Press and release b. Press and release c. The tail and marker lights flash 1 time, the both the LOCK and buzzer chirps 1 time, and the doors lock the LOCK button.
Page 6 TOYOTA TVIP SYSTEM PROGRAMMING−RS3200 REMOTE CONTROL FUNCTION SELECT Follow this procedure to change the operating functions of remote controls already programmed into a system. You may change the remote control s defau lt unlock operation mode so that pressing the UNLOCK button once causes all doors to unlock at the same time.
Page 7
TOYOTA TVIP SYSTEM PROGRAMMING Page 7 REMOTE CONTROL FUNCTION SELECT (continued) 3. Select the operating functions for an existing remote control. a. Press and release both the LOCK and UNLOCK buttons on one remote control at the same time. b. Select one of the following modes:...
Page 8 TOYOTA TVIP SYSTEM PROGRAMMING−RS3200 CLEAR ALL REMOTE CONTROL CODES Follow this procedure to clear all remote controls programmed to operate the system. Please note, if you have remote controls to program into the system and you want to first clear all existing remote controls from the system, follow the reprogram procedure as shown on pages 4 and 5.
TOYOTA TVIP SYSTEM PROGRAMMING Page 9 PASSIVE ARMING ON/ OFF SELECTION AND ENTRY DELAY TIME SELECTION The RS3200 is factory set to not passively arm. To change the system s operation for passive arming, as well as to adjust the entry delay time, follow the procedure below.
Page 10 TOYOTA TVIP SYSTEM PROGRAMMING−RS3200 IGNITION− CONTROLLED AUTOMATIC DOOR LOCK/ UNLOCK When all doors are closed, the RS3200 is factory set to automatically lock the vehicle s door when the ignition key is turned to ON or START, and unlock them (open or not) when the key is turned back to ACC or LOCK.
Page 11
TOYOTA TVIP SYSTEM PROGRAMMING Page 11 PASSIVE ARMING ON/ OFF SELECTION AND ENTRY DELAY TIME SELECTION The RS3200 PLUS is factory set to not passively arm. To change the system s operation for passive arming, as well as to adjust the entry delay time, follow the procedure below.