Toyota TVIP-RS3200 Programming Manual page 7

TOYOTA TVIP SYSTEM PROGRAMMING
REMOTE CONTROL FUNCTION SELECT (continued)
3. Select the operating functions for an existing remote control.
a. Press and release both the LOCK
and UNLOCK buttons on one
remote control at the same time.
b. Select one of the following modes:
Press and release the
LOCK button to select
double unlock function
(press the UNLOCK
button twice to unlock all
the doors.)
c. The tail and marker lights flash 1 time, the
buzzer chirps 1 time, and the doors lock
and unlock 1 time.
Note: Repeat the above steps to select the operating
functions for additional remote controls.
* Program for 4 button remote controls, only.
If the system activates the lights, buzzer and door locks 2 times, start over.
or Press and release
the UNLOCK button
to select all door
unlock function
(press the UNLOCK
button once to unlock
all the doors at the
same time.)
or Press and release
the AUX button to
select double
unlock function
(press the UNLOCK
button twice to unlock
all the doors) and
activate the auxiliary
output for the
optional electric trunk
release accessory.*
4. Complete the programming steps.
a. Open the driver s door
Page 7
or Press and release
the PANIC button to
select all door
unlock function
(press the UNLOCK
button once to unlock
all the doors at the
same time) and
activate the auxiliary
output for the
optional electric trunk
release accessory.*