POWER CONNECTIONS
Low voltage Plug in transformer.
Connect 16V AC connectors on plug in transformer to 16V AC connectors on controller card.
DO NOT CONNECT 220V DIRECTLY TO PCB
Low voltage on board transformer – 220V at gate.
Connect 220V AC to input side of 16V AC transformer (black & brown wires), connect output
wires (red) to16V AC connectors on controller card.
DO NOT CONNECT 220V DIRECTLY TO PCB
IF 220V IS USED AT GATE MOTOR, A SEPARATE DOUBLE POLE ISOLATOR MUST
BE FITTED WITHIN 1M FROM MOTOR.
4