Sym Track Runner 200 Service Manual page 209

To this chapter contents
17. ELECTRICAL SYSTEM
Meters
Removal
Remove handle cover.
3 Screws
Main switch coupler
Remove the front cover, and then remove meter
coupler and main switch coupler.
Meter set couplers
Remove speedometer cable.
Loosen 4 bolts of the meter stay, and then remove
meter set and main switch.
4 bolts (meter stay)
Remove 4 nuts and meter wire, and then remove 4 nuts
meters.
Installation of Starter motor
Install in reverse order of removal procedures.
17-12