Sym Track Runner 200 Service Manual page 158

Disassembly
Caution
Never install used bearings. Once bearing
removed, it has to be replaced with new one.
Remove out side bearing and seal from wheel hub
using following tools.
Special tool:
Inner bearing puller
Remove front wheel hub bearing inner spacer.
Remove inner side bearing and oil seal from wheel
hub using following tools.
Special tool:
Inner bearing puller
Remove 4 socket bolts, and then remove the
brake disk from wheel hub.
To this chapter contents
14. FRONT BRAKE & FRONT WHEEL
Inner bearing puller
Inner bearing puller
Inner spacer
4 bolts
14-5