Sym Track Runner 200 Service Manual page 195

16. REAR BRAKE & REAR WHEEL & REAR CUSHION
Right footrest side – rear brake master cylinder
B
Install the master cylinder socket bolts and the
master cylinder.
Install brake push rod to the brake pedal, and
install pin and E type clip.
Caution
To adjustment brake pedal, you must be
removed push rod pin fist.
Loosen lock nut, and turn adjustment nut and
push rod bracket to adjustment brake free play.
Install fluid hose and clamp.
Connect brake hoses with 2 new washers.
Tighten the brake hose bolt to the specified torque
value.
Torque: 3.5kgf-m
Make sure the hose is installed correctly.
Install all wires, hoses, and components carefully
so avoid to twisting them together.
Add specified brake fluid and bleed the system.
16-16
To this chapter contents
2 socket bolts
2 washers
Lock nut Adjustment nut
E type clip
Hose clamp