Sym Track Runner 200 Service Manual page 105

To this chapter contents
9. FINAL DRIVING MECHANISM
Disassembly of Final Driving
Drive sprocket bolts
Mechanism
Remove engine.
Remove driven pulley.
Drain gear oil out from gear box.
Remove drive sprocket.
Gear oil drain bolt
10 bolts
Remove shift spindle bracket.
Remove gear box cover bolts (10 bolts) and then
remove the cover and final shaft.
Shift spindle bracket
Remove shift spindle, shift drum, shift fork shaft
Shift spindle
and fork.
Shift drum
Shift fork
Remove gear shift shaft, gear and washer. Counter shaft
Dowel pin
Remove counter shaft and gear.
Remove gasket and dowel pin.
Dowel pin
Gear shift shaft
9-4