Basic copy operations
2
In the Basic screen, touch [Separate Scan].
–
To cancel the "Separate Scan" setting, touch [Separate Scan] again to deselect it.
3
Press the [Start] key.
After the original has been scanned, the following message appears.
–
Load the next batch of the original, and then press the [Start] key.
–
If the "Separate Scan Output Method" parameter is set to "Batch Print", touch [Finish] in the
following screen, which appears while the original is scanned with the ADF, to continue to step 5.
–
If the original cannot be loaded into the ADF, place it on the original glass. For details on the types
of originals that can be loaded into the ADF, refer to
–
To change the scanning settings, touch [Change Setting]. For details on changing the scanning
settings, refer to
–
The buttons that appear in the screen for changing the settings differ depending on the specified
settings. Settings for the following can be changed.
1-Sided/2-Sided, Density/Background, Original Type, Binding Position, Zoom, Original Size, Frame
Erase, Center Erase
751/601
"Changing scan settings for each original" on page
"Originals" on page
6-29.
2-26.
2
2-9