Tiling Copy Images ("Image Repeat" Function) - Konica Minolta bizhub 601 User Manual

Application functions
7.9

Tiling copy images ("Image Repeat" function)

An original image can be repeatedly printed on a single sheet of paper.
The possible number of repeating images is automatically selected based on the size of the loaded original,
the specified paper size and the zoom ratio.
The following repeating formats and settings are available.
Setting
With Margin
Without Margin
2/4/8 Repeat
1
Position the original to be copied.
– For details on positioning the original, refer to
2
Load the paper to be used into the desired paper tray.
3
Touch [Application], and then touch [Book Copy/Repeat].
– To cancel changes to the settings for all Application functions, press the [Reset] key. All changes to
the settings are canceled.
The Book Copy/Repeat screen appears.
751/601
Description
Multiple copies are printed of the entire image within the specified area. The area around
the image appears as a margin.
Multiple copies of the selected area of the image are printed to fill the paper; however,
a part of the image may be cut off.
A fixed number of copies of the selected image area are printed in the paper. The
number of repeating copies can be set to 2, 4 or 8 times. However, any part of the image
that does not fit within its specific section of the paper is cut off.
Original
With Margin
Without Margin
"Feeding the original" on page
7
2-6.
7-29