Selecting A Folding Setting; Folding Copies In Half ("Half-Fold" Setting) - Konica Minolta bizhub 601 User Manual

Basic copy operations
2.12

Selecting a folding setting

By installing optional equipments, copies can be folded, or folded and bound with staples at the same time,
and then fed out. Available settings differ depending on the optional equipments installed.
Setting
Half-Fold
Center Staple & Fold
Tri-Fold
Z-Fold
Note
Copies can be folded in half or in three or bound at the center only if Finisher FS-610 is installed.
Z-folding is available when the Z folding unit is installed with the finisher. For details, refer to
and outputting papers ("Z-Fold" setting)" on page
2.12.1

Folding copies in half ("Half-Fold" setting)

Finisher FS-610
Paper weight
Plain paper
(16 lb to 24 lb)
751/601
Description
Select this setting to fold copies in half before feeding them out.
(Refer to page 2-65.)
Select this setting to staple copies at two places along the center,
then fold the copies in half before feeding them out. (Refer to
page 2-67.)
Select this setting to fold copies in three before feeding them out.
(Refer to
page 2-68.)
Select this setting to fold copies in half along the center, and ad-
ditionally mountain-fold one of the halves before feeding them
out.
Paper size
Standard sizes:
11 × 17 w, 8-1/2 × 14 w, 8-1/2 × 11 w, A3 w, B4 w, A4 w, 8K w, wide paper (11 ×
17W w,8-1/2 × 11W w, A3W w, B4W w, A4Ww)
Custom sizes:
8-1/4 × 11 to 12-3/8 × 18-1/16
2-70.
2
Compatible models
FS-610
FS-610
FS-610
FS-524
FS-525
FS-610
"Z-Folding
2-65