Application functions
7.15.3
Printing previously registered stamps ("Stamp" function)
1
Position the original to be copied.
–
Use the Copy Protection Utility to register a registered stamp. For details on registering stamps,
refer to the manual of the Copy Protection Utility.
–
For details on positioning the original, refer to
2
Touch [Application], and then touch [Stamp/Composition].
–
To cancel changes to the settings for all Application functions, press the [Reset] key. All changes to
the settings are canceled.
The Stamp/Composition screen appears.
3
Touch [Stamp].
–
To cancel the "Stamp" function, touch [No].
The Stamp screen appears.
751/601
"Feeding the original" on page
7
2-6.
7-58