Changing Scan Settings For Each Original - Konica Minolta bizhub 601 User Manual

Basic copy operations
3
Touch [Binding Position].
The Binding Position screen appears.
4
Touch the button for the desired binding margin position, and then touch [OK].
– To cancel the setting and select the default, press the [Reset] key.
2.4.9

Changing scan settings for each original

When scanning an original while using the "Separate Scan" setting or when multi-page originals are scanned
from the original glass, the scan settings can be changed for each original. The following procedure describes
how to change the settings when the "Separate Scan" setting is used.
1
Position the original to be copied.
2
In the Basic screen, touch [Separate Scan].
751/601
2
2-26