Konica Minolta bizhub 601 User Manual page 162

Additional copy operations
– For details on the automatic system reset operation, refer to
(Sleep mode)" on page
– The number under "Number of Sets" in the screen that appeared when a proof copy is printed
indicates the number of sets printed as proof copies/total Number of Sets specified.
– The number under "Total # of Pages Printed" in the screen that appeared when a proof copy is
printed indicates the number of copies printed as proof copies/the number of pages printed in the
proof copy.
7
In the screen allowing you to change the settings, change the copy settings as desired, and then touch
[OK].
To cancel changes to the settings, touch [Cancel].
– If the copy settings cannot be changed, stop printing the proof copy. Next, press the [Reset] key to
cancel the copy settings, and then specify the desired settings.
– To stop copying while the screen for changing the settings is displayed, select the proof copy job
to be stopped from the list of jobs in the left panel, and then touch [Delete]. In the screen that
appears, requesting confirmation to delete the copy program, touch [Yes], and then touch [OK].
– To cancel changes to the settings in the screen for changing the settings, press the [Reset] key while
the screen for changing the settings is displayed to reset the settings to those specified in step 2.
– The number beside "Copies" in the screen for changing the settings is the number of copies that
will be printed when [Finish] is touched.
8
Press the [Proof Copy] key to print another proof copy.
– To stop the proof copy while scanning or printing, perform the operation described in
stopping scanning/printing" on page
9
Touch [Print].
The remaining copies are queued as a copy job.
751/601
1-33.
2-78.
"Automatically conserving energy
"Temporarily
3
3-6