Konica Minolta bizhub 601 User Manual page 42

Before Making Copies
No. Part name
1 Touch panel
2 Main Power indicator
3 [Power] (auxiliary power) key
4 [Mode Memory] key
5 [Utility/Counter] key
6 [Reset] key
7 [Interrupt] key
8 [Stop] key
9 [Proof Copy] key
10 [Start] key
11 Data indicator
12 [C] (clear) key
13 Keypad
14 [Help] key
15 [Enlarge Display] key
16 [Accessibility] key
17 [Power Save] key
18 [Access] key
19 [Brightness] dial
20 [User Box] key
21 [Fax/Scan] key
22 [Copy] key
Reminder
Do not apply extreme pressure to the touch panel, otherwise it may be scratched or damaged.
751/601
Description
Displays various screens and messages.
Specify the various settings by directly touching the panel.
Lights up in green when the machine is turned on with the main power switch.
Press to turn on/off machine operations. When turned off, the machine enters
a state where it conserves energy.
Press to register (store) the desired copy/fax/scan settings as a program or to
recall a registered program. (See
Press to display the Meter Count screen and the Utility screen.
Press to clear all settings (except programmed settings) entered in the control
panel and touch panel.
Press to enter Interrupt mode. While the machine is in Interrupt mode, the in-
dicator on the [Interrupt] key lights up in green and the message "Now in Inter-
rupt mode." appears on the touch panel. To cancel Interrupt mode, press the
[Interrupt] key again.
Pressing the [Stop] key while copying, scanning or printing temporarily stops
the operation.
Press to print a single proof copy to be checked before printing a large number
of copies. (See
p. 3-5.)
Press to start the copy, scan or fax operation. When this machine is ready to
begin the operation, the indicator on the [Start] key lights up in blue. If the in-
dicator on the [Start] key lights up in orange, copying cannot begin.
Press to restart a stopped job. For details on jobs, refer to
List screen" on page 10-2.
Flashes in blue while a print job is being received.
Lights up in blue when a print job is queued to be printed or while it is being
printed.
The indicator lights up in blue when there is saved fax data or unprinted fax
data.
Press to clear a value (such as the number of copies, a zoom ratio, or a size)
entered using the keypad.
Use to type in the number of copies to be produced.
Use to type in the zoom ratio.
Use to type in the various settings.
Press to display the Help Menu screen.
From this screen, descriptions of the various functions and details of opera-
tions can be displayed. (See
p.
Press to enter Enlarge Display mode.
Press to display the screen for specifying settings for user accessibility func-
tions.
Press to enter Power Save mode. While the machine is in Power Save mode,
the indicator on the [Power Save] key lights up in green and the touch panel
goes off. To cancel Power Save mode, press the [Power Save] key again.
If user authentication or account track settings have been applied, press this
key after entering the user name and password (for user authentication) or the
account name and password (for account track) in order to use this machine.
Use to adjust the Brightness of the touch panel.
Press to enter User Box mode.
While the machine is in User Box mode, the indicator on the [User Box] key
lights up in green. For details, refer to the User's Guide [Box Operations].
Press to enter Fax/Scan mode.
While the machine is in Fax/Scan mode, the indicator on the [Fax/Scan] key
lights up in green.
For more details, refer to the User's Guide [Network Scan/Fax/Network Fax
Operations].
Press to enter Copy mode. (As a default, the machine is in Copy mode.) While
the machine is in Copy mode, the indicator on the [Copy] key lights up in green.
p. 3-8.)
"Overview of Job
3-13.)
1
1-23