Specifications - Plymouth Gran Fury 1980 Operating Instructions And Product Information

Specifications
License Data
Vehicle Identi fication N umber- Stamped plate is located on left
front comer of instrument panel pad, visible from outside of car
through windshield. This number also appears on the Au-
tomobile Information Disclosure Label affixed to a window of
your vehicle. Save this label for a convenient record of your
vehicle identification number and optional eq u ipment.
Fuses
The driver's side lap cooler hose must be removed for access to
the fuse block. The fuse block is located above and rearward of the
accelerator pedal. For access, s lide it forward and off its clip.
The circuit each fuse protects is indicated by numbers on the fuse
block. The headlamps and washer/wiper circuits are protected by
switch-mounted circuit breakers .
This car uses new blade fuses in place of glass cartrid ge fuses. The
amperage rating of th e blade fuse is stamped on top of the fuse
body. The fuse bodies are also colored according to a mperage
rating. The colors of the fuses are found on the charts un der the
fuse rating.
Ca ution
When replacing a blown fuse, it is important to replace it with a
fuse having the correct amperage rating. The use of a fuse with a
rating other than indicated may result in a dangerous electrical
overload. If a proper rated fuse continues to blow, it indicates a
problem in the circuit that must be corrected .
"
Trailer tow circuits are fused to corresponding car circuits. For
example, the trailer tow stop lamps are fused th rough the same
fuse as the car stop lamps.
Cavity Fuse
1 20 Am p
Yellow
2
3
4
5
Empty
30 Amp
O B
30 Amp
Lt. Green
20 Amp
Yellow
Circuits
Hazard Flashers
Power Window Motors, Power Sun roof
Motor, Illuminated Entry Sense
AOHeater Blower Motor, Heated Rear
Window Relay, Decklid Release Solenoid
Cavity #13, Park Lamps, Side Markers,
Edge Lite Quarter Window Lamps, Tail
Lamps, License Lamp, Clock Display,
Search Tune and CB Radio Display
65