Unibelt Operating Instructions - Plymouth Gran Fury 1980 Operating Instructions And Product Information

10
UNIBELT
OPERATING
INSTRUCTIONS
1.
Enter the car and adjust the seat.
2. Grasp the metal tip located beside the
seat and pull the belt forward across the
body so that the shoulder portion of the
belt crosses the shoulder and chest.
3. As you pull the metal tip toward the
buckle, a llow the webbing to slide
through the tip. This system will not
lock up if you stop or hesitate, so relax
and continue to " buckle- up".
4. Slack will automatically be removed
due to tension created by the retractor.
5. To release the belt, push the button
on th e buckle. The belt will a utomati-
cally retum to its stowed position .
DELUXE UNIBELT
SYSTEM WITH
TENSION RELIEVER AND
AUTOMATIC RELEASE
(optional on most models)
1.
Enter the car and adjust the seat. Note the
metal tip of the Unibelt in stowed position
high o n the vertical bod y center pillar.
CLOSE DOOR
2. Grasp the metal ti p and slide it up the
webbing as far as necessary to go around your
lap as you pull o ut the webbing. A couple of
tries and this will become an automatic one
handed operation.
3. As you pull the webbing, move the metal
tip toward the buckle. This system wi ll not
lock up if you s to p o r hesitate, so relax and
continue operation.
Insert the tip into the buckle unti l a " click" is
heard.