Plymouth Gran Fury 1980 Operating Instructions And Product Information page 23

Tilt Steering
Wheel
(Optional)
To tilt the w heel,
simply lift up the
small lever below
the tum signal
control, move the
wheel up or down,
as desired, and
release the lever to
lock
the w heel
firmly in place.
Automatic Speed Control (Optional)
When engaged, this device takes over the accelerator operation at
speeds above 30 mph (48 kmih). The controls are located at the
end of the multi-function control lever and consist of a Speed Set
Button and a Control Slide.
To Activate - When the car has reached the desired speed, push
the SET button to move the control slide to the ON position. This
wi ll establi sh memory and activate the system . Remove your foot
from the accelerator. Pushin g the control slide from OFF to ON
while the vehicle is in motion establishes memory at that speed,
but does not activate the system. The slide may be left in the ON
position when the car is parked.
To Deactivate - A soft tap on the brake pedal or normal brake
pressure while slowing the car will deactivate auto speed control
without erasing the memory. Pushing the control slide to the OFF
position or turnin g off the ignition erases the speed memory.
To Resume Speed- Push the control slide to the RESUME posi-
tion and the car will return to the previously memorized speed.
When using the RESUME feature, do not allow the slide to pop
back to ON. It may over-shoot a nd tum the unit off.
To Vary the Speed Setting - You can reset th e con trol to any
desired speed by accelerating o r s lowing to that speed and press-
ing the SET button.
Automatic Speed Control
21