Hydro Unit Function Code Setting; How To Set Remote Controller Function Code - Toshiba HWS-802XWHM3-E Service Manual

2. Hydro unit Function Code Setting

2-1. How to set function code
<Procedure> Perform the following when no operation is in progress.
1
Press the SET
buttons at the same time for 4 seconds or longer.
(See display )
2
Specify CODE NO. (FC) with the TEMP.
for temperature setting.
3
Select a setting data with the TIME
setting.
The value in the DATA item changes.
4
Press the SET
confirmed)
To change the item to be set, go to
5
Pressing the TEST
stop state.

2-2. How to set remote controller function code

This operation can set the start and end time of the nighttime low noise, anti bacteria, night set back, or other
functions.
<Procedure> Perform the following when no operation is in progress.
1
Press the TEST
the same time for 4 seconds or longer. (See display
appears on the left.
2
Specify CODE NO. (FC) with the TEMP.
for temperature setting.
3
Select a setting data with the TIME
setting.
The value in the DATA item changes.
4
Press the SET
status is normal)
To change the item to be set, go to
5
Pressing the TEST
stop state.
and TEST and SELECT
button. (If lights, the status is
2
.
button moves the unit to the normal
and CL and TEMP.
button.(If the blinking changes to lit, the
2
.
button moves the unit to the normal
button
2
button for timer
3
buttons at
)
button
2
button for timer
3
4
106
4 5 1
1 5