Nighttime Low-Noise Operation - Toshiba HWS-802XWHM3-E Service Manual

Item
8-2.

12) Nighttime low-noise operation

A night time low-noise operation reduces operation frequency and the number of outdoor fan rotations for a certain period
Operation
during nighttime as noise control for neighborhood.
Mode and
Control Method
Maximum operation frequency 40.2 Hz (Hot water supply/ Heating/ Cooling)
Maximum fan tap
The nighttime low-noise operation is enabled/ disabled by changing the remote controller FC_09.
<How to set>
1) Press the TEMP.
noise setting mode)
The Code No. field displays "09", and the DATA "0000",
2) Press TIME
Pressing SET
(When "1" as enable is set, the nighttime low-noise setting is enabled, the control starts at the set start time.)
3) Press TEST
status.
Operation flow and applicable data, etc.
460 rpm (802H-E)
500 rpm (1102H-E, 1402H-E)
and TEST button at the same time for 4 seconds or longer. (Shifted to the nighttime low-
to set enable "1" or disable "0".
change DATA and display to be lit and the setting is confirmed.
to exit the nighttime low-noise time setting mode. The
47
, and being displayed blink.
and goes out, returning to its original