Trial Operation - Toshiba HWS-802XWHM3-E Service Manual

3. Trial Operation

<Procedure>
A trial operation is available with an actual operation in progress or stopped. A trial operation is available in any of
the hot water supply, heating, or cooling mode. The compressor starts according to the trial operation frequency.
A trial operation automatically stops after 30 minutes at the longest if not stopped with the remote controller.
1
Press the remote controller TEST
longer to display "TEST" on the LCD screen.
<For hot water supply trial operation>
2
Press the HOT WATER
operation starts after 3 minutes. (See display
(The pump immediately starts.)
3
Pressing the HOT WATER
water supply operation.
<For heating trial operation>
1
Press the ZONE1,2
starts after 3 minutes. (See display
(The pump immediately starts.)
2
Pressing the ZONE1,2
operation.
<For cooling trial operation>
2
Press the ZONE1,2
, and a cooling operation starts after 3 minutes.
(The pump immediately starts.)
3
Pressing the ZONE1,2
operation.
4
Press TEST on the remote controller to exit the trial
operation mode.
button for 4 seconds or
button, and a hot water supply
button again stops the hot
button, and a heating operation
)
button again stops the heating
button and then OPERATE MODE
(See display )
button again stops the cooling
109
)
1, 4 2, 3
1, 4 2, 3
1, 4 3 2