Jøtul F 262 Installation And Operating Instructions Manual page 7

Fig. 6
B
1. Unscrew the screws (Fig. 6 A) and remove the smoke outlet
(Fig. 6 B) from the inside of the burn chamber.
Fig. 7
1. Unscrew the screws (Fig. 7 C) and remove the cover (Fig. 7 B)
from the rear outlet from the inside of the burn chamber.
Fig 8
A
1. Knock out the removable covers (Fig. 8 A).
2. Attach the smoke outlet (Fig. 7 A) on the inside of the burn
chamber where the cover was.
3. Install the cover (Fig. 7 B) where the smoke outlet was.
4. Refit the exhaust deflectors (Fig. 5 B) and the baffle plate
(Fig. 5 A).
A
B C
A
Fig. 9
A
B
1. Place the gasket (Fig. 9 A) from the bag of screws around
the edge of the flue pipe and push it into the smoke outlet
(Fig. 9 B).
4.5 Mounting side panels
Steel side panels
Fig. 10
Fig. 11
Fig. 12
1. If rear outlet: Use proper tool to remove the cover
plate (Fig. 10 A) in the side panel (Fig. 10 B).
2. Lift the side panel and lower it over the bolts (Fig. 10 C
and Fig. 12).
3. Mount the other steel side panel the same way.
ENGLISH
B
A
C
C
7