ENGLISH
Fig. 21
1.
Lower the rear plate (Fig. 21 A) onto the bolts (Fig. 21 B).
2.
Mount nuts from inside of the base (Fig. 21 C).
Fig. 22
1.
Place the top plate (Fig. 22 A), air grate (Fig. 22 B) and
bowl (Fig. 22 C).
If soapstone top:
Fig. 23
Place the soapstone top (Fig. 23 A) on the guiding warts
1.
(Fig. 23 B).
2.
Place the steel cover (Fig. 23 C).
10
C
B
A
C
B
A
C
A
B
4.6 Mounting the fireplace set (optional
equipment)
Fig. 24
A
B
3.
Mount the bracket (Fig. 24 A) to the door with the screws
(Fig. 24 B).
4.7 Control of functions
When the product is set up, always check the control functions.
These shall move easily and function satisfactorily.
The product is equipped with one handle. This handle controls
both the ignition vent and the air vent.
•
Pulled out completely (the label visible): Ignition.
•
Pushed in (the label not visible): Air vent.