CL-1200 User Manual
Components
Front View
No.
Component
1
Handle
2
Slide Release
3
LCD Display
4
LCD Controls
5
Keyboard
6
Touchpad
7
Power LED
8
Rack Mounting
Tabs
9
Lock LEDs
10
Reset Switch
4
3
4
5
6
7
Pull to slide the KVM module out; push to slide the module in.
In order to slide the console out, you must first release it by
moving this tab sideways. See p. 11 for details on sliding the
console in and out.
After sliding the KVM module out, flip up the cover to access
the LCD monitor.
The LCD On/Off switch is located here, as well as buttons to
control the position and picture settings of the LCD display.
See p. 14, for details.
Lights BLUE to indicate that the unit is receiving power.
The rack mounting tabs located at each corner of the unit
secure the chassis to a system rack.
The Num Lock, Caps Lock, Scroll Lock LEDs are located here.
Located to the right of the Lock LEDs. Press this recessed
switch in with a thin object to perform a system reset.
2
1
9
10
8
Description
2