Installation And Wiring; Installation - Montarbo Spot 2500T User Manual

user's manual
POLE MOUNTING: Preset P1
STACKED: Preset P2
10
ENGLISH
PROFESSIONAL LOUDSPEAKER SYSTEM PROFESSIONAL LOUDSPEAKER SYSTEM

3 - INSTALLATION AND WIRING

3.1 - INSTALLATION

The full-range SPOT2500T speakers may be installed in various ways,
and the internal DSP presets allow to optimize their performances in the
various configurations.
- They may be installed over of the SPOT15B bass cabinet, using the SM3
dedicated mounting pole (optional accessory) fitted in the built-in adapters
(h: page 5 and q: page 9) - 'Pole Mounting' configuration, P1 preset.
- They may be placed on stage ground or stacked over the SPOT15B bass
cabinet -'Stacked' configuration, P2 preset.
- The may be stacked upside-down over the SPOT15B bass cabinet, thus
creating a dipole configuration that will result in increased sound pressure
at low frequencies -'Dipole' configuration, P3 preset.
- They may be placed side-by-side to create a 'cluster' of two or more
speakers, thus extending the horizontal dispersion without creating
wave-front interferences - 'Cluster' configuration, P4 preset.
For each one of these configurations, illustrated in the following figures, a
dedicated factory preset is provided in the internal DSP (refer to par. 4.1).
DIPOLE: Preset P3 CLUSTER: Preset P4