Introduction; Features; Installation - Montarbo Duetto Light 8 User Manual

paSSIvE fULL RanGE loudspeakers

IntRoDUctIon

First of all, thank you for choosing a product fiveO by montarbo
series has been designed for those who want to set-up a portable and very user friendly audio sound system with excellent
performances and outstanding value. dueTTo lIGHT are manufactured with high quality components to assure you satisfying
and reliable operation over many years.
dueTTo lIGHT passive full-range loudspeakers perfectly suit the needs of small bands, rehearsal rooms, installation, pubs,
DJ-sets and any further application where a passive speaker better suits the needs.
Please, in order to enjoy each feature of your new loudspeakers, thus achieving the best sonic results, take a few moments
to carefully read these instructions.
For further information about your passive full-range loudspeaker series, please check our website www.fiveo.it or send
an email to mail@fiveo.it

FeAtURes

dueTTo lIGHT passive full-range loudspeaker series has been designed be very user-friendly. The cabinet design main
goals were to provide light-weight and high-strength units. So we choose plastic cabinet and we added transport handles,
and several options for the right placement. The choice of speakers has been very careful, each driver has been expressly
designed and approved by our engineers to achieve optimum performances. Of course, the shape of the cabinet is ideal for
the best dispersion and smooth off-axis response.
To improve dueTTo lIGHT versatility, we added 6.35 mm (¼") and 4-pole speakOn
you to daisy-chain the needed quantity of speakers for any application.
- 6.35 mm (¼") jack and 4-pole speakOn
- 6.35 mm (¼") jack and 4-pole speakOn
- Rugged plastic enclosure with heavy-duty finishing.
- Vented cabinet for lower frequencies increased efficiency and extended frequency response.
- Wide dispersion horn for higher frequencies improved dispersion.
- Versatile positioning: stacking, rigging and pole mount.
- Built-in heavy-duty handles for easy and reliable transport.

InstALLAtIon

Don't place your dueTTo lIGHT passive speaker close to high-temperature devices such as amplifiers, radiators or exposed
to direct sunlight. Each loudspeaker is connected to the power amp via the 6.35 mm jack (¼") and 4-pole SpeakOn InPUT
and lInK connectors. First connect the mains cable to the amplifier, then connect the cable from amplifier to your dueTTo
lIGHT, finally turn on your amplifier.
Please note that all amplifiers must be properly grounded. For your own safety, you should never remove any ground
connector/device from electrical devices or power cables, or make them inactive. Please ensure that only qualified people
install and operate the portable Pa unit.
versatile mounting and placement
Thanks to dueTTo lIGHT cabinet shape and to provided accessories, you can easily use your active speakers for all application
and in any environment.
You can use your dueTTo lIGHT placed on any floor, since each loudspeaker bottom side has heavy duty rubber feet, which
are secured to the cabinet by screws. In this case you can also rotate FiveO logo, after removing it with a screwdriver. You
can also stack more dueTTo lIGHT speakers, using the bottom cabinet feet and the upper side stacking notches.
In your rehearsal room or pub, you can rig your dueTTo lIGHT using its rigging points. These points must be secured
using m8 bolts and reliable brackets on wall or ceiling. Please, consult a professional rigger or structural engineer prior to
suspending your loudspeaker.
alternatively, you can place your dueTTo lIGHT on a standard 36 mm (1.4") pole for mobile application in pubs or outdoor
concerts. Furthermore, you can use your loudspeaker as a wedge monitor using each package included brackets, to be easily
fitted and secured by screws.
speakON is a registered trademark under the property Neutrik
®
Owner's manual | DUETTO LIGHT SERIES Passive Full Range loudspeakers
4
inputs on all models.
®
link output on all models.
®
AG.
®
. dueTTo lIGHT passive full-range loudspeaker
®
® InPUT and lInK connectors. allowing