Building The Speaker's List - Montarbo Spot 2500T User Manual

PROFESSIONAL LOUDSPEAKER SYSTEM PROFESSIONAL LOUDSPEAKER SYSTEM

5.3.1 - Building the speaker's list

Each speaker system in the Montarbo's FULL, SPOT and WIDE series has,
permanently written in the internal DSP's software, a unique ID (name) in
the hexadecimal format 'Hxxxxxxxxxxxxxxx', that will distinguish it from
all the others (a digital 'serial number').
To start building the speaker's list, click on the StartAW button (top left).
A small window will open to ask for a confirmation.
Click OK if you really want to build a new list, otherwise click Cancel.
After clicking OK, the program's windows will be empty.
To register a speaker in the list, push both the rear panel UP and DOWN
buttons at the same time (see fig. 'Connections and controls' page 6)
Repeat this operation for all the networked speakers, one at a time.
The speakers will send their ID to the program, which will register them
in the list and will display their ID in the upper left window.
When done with the last networked speaker, click on StopAW to end the
process. The program has now built a speaker's list and the display will look
like the following screen.
NOTE: the maximum number of speakers that may be controlled by the
RAConLS program is 10.
user's manual
31
ENGLISH