Management Of Presets - Montarbo Spot 2500T User Manual

PROFESSIONAL LOUDSPEAKER SYSTEM PROFESSIONAL LOUDSPEAKER SYSTEM

5.3.3 - Management of Presets

The preset management window is shown in the lower right corner.
The upper number indicates the active preset that may be set using the
two arrow buttons.
It is possible to save to the PC every adjustment made to the speaker's
settings and then recall them later and load them as the active preset.
Once one of the factory preset options (numbered 1 to 4) or the user's
preset (number 0) has been selected, it is loaded to the speaker's DSP by
clicking Run and will become active after a delay of a few seconds.
If the preset has been edited (modified by changing the equalizer's setting
or the delay) it can be saved on the PC hard disk by clicking the SaveHDD
button, or can be stored in the speaker's DSP by clicking SaveDSP.
The OpenHDD button allows you to load a preset that has been saved on
the PC's hard disk (or on any other memory device) and make it the active
preset.
If a speaker is part of an L/R pair, any operation on the presets done
on one speaker will be automatically copied on the other.
Important: it is not possible to permanently modify the DSP's factory
presets (numbers 1 to 4).
It is possible to permanently store in the DSP an edited (modified) preset
only as a User Preset (number 0).
To do so, follow this procedure: load one of the factory presets (1 to 4)
and edit it (or load an edited one from the PC, by clicking on OpenHD),
then save it as preset number 0 by clicking on SaveDSP.
This way the modified preset will replace the DSP preset number 0, and
it may be recalled, even without the RAConLS program, by means of the
speaker's rear-panel pushbuttons.
So, if the speaker's selected preset is the number 0 (User Preset), it will
be the default preset at switch-on.
Any future updated preset which may be made available from Montarbo
will be loaded the same way: first saved on the PC as preset files, then
recalled and stored as described above.
user's manual
35
ENGLISH