Montarbo Spot 2500T User Manual page 19

NUMBER CONFIG. (LED)
1 P1
2 P2
3 P3
4 P4
5 P1 + Sub1
6 P1 + Sub2
7 P2 + Sub1
8 P2 + Sub2
9 P3 + Sub1
10 P3 + Sub2
11 P4 + Sub1
12 P4 + Sub2
0 P0 + .......
PROFESSIONAL LOUDSPEAKER SYSTEM PROFESSIONAL LOUDSPEAKER SYSTEM
The following table has a description of the factory presets:
DESCRIPTION
POLEMOUNTING = SPOT2500T mounted on SPOT15B with an SM3 mounting pole
STACKED = SPOT2500T placed on top of SPOT15B
DIPOLE = SPOT2500 reversed (upside down) and placed on top of SPOT15B
CLUSTER = horizontal cluster of two or more SPOT2500T placed side-by-side
POLEMOUNTING + wide range subwoofer output
POLEMOUNTING + band-limited subwoofer output
STACKED + wide range subwoofer output
STACKED + band-limited subwoofer output
DIPOLE + wide range subwoofer output
DIPOLE + band-limited subwoofer output
CLUSTER + wide range subwoofer output
CLUSTER + band-limited subwoofer output
USER PRESET = one of the above after being personalized by the PC program
The UP and DOWN push-buttons make it possible to select the desired
preset.
Push the UP button and the preset number increases; pushing the DOWN
button and the preset number decreases.
The selected preset's LED will flash, but the new preset is not yet active.
To make it the active preset, push both the UP and DOWN buttons at the
same time. The new preset will be active after a few second delay.
Two LEDs will come on: both P0 and the one related to the preset which
has been modified to create P0.
During the presets loading phase, the system is muted.
user's manual
19
ENGLISH