Main Controller Window - Montarbo Spot 2500T User Manual

user's manual
IMPORTANT: The networked speakers are displayed as Left / Right pair.
The two speakers in a L/R pair may be linked together and both controlled at the same time, as will be
described in the following paragraphs.
The order in which the speakers are displayed is the same as the order in which they were registered by
pushing the UP and DOWN buttons.
If you wish to group two speakers in a L/R pair (for example the two speaker that form the main stereo FOH
system), the corresponding speakers must be registered in sequence, e.g. first/second, third/fourth, fifth/sixth,
or seventh/eight, but not second/third etc.).
32
ENGLISH
PROFESSIONAL LOUDSPEAKER SYSTEM PROFESSIONAL LOUDSPEAKER SYSTEM

5.3.2 - Main controller window

The windows will display the logos that identify the speakers' series, their
unique ID in the hexadecimal format 'Hxxxxxxxxxxxxxxx' and their active
Preset.
The Mute button (up-center) is the global mute command that acts on all
networked speakers.
Inside the speaker's windows is a single Mute button that acts on the
individual speaker.
By selecting the L&R Link tab (placed between the left and right speaker's
windows) it is possible to simultaneously control two speakers (this is not
possible for the stereo models such as the FULL612).
In this case both the Mute and EDIT pushbuttons of the Left speakers are
disabled, because they are controlled by the those of the Right speaker.
Clicking on Edit will open the selected speaker's control windows.