When Using The Multifunctional Digital Systems - Toshiba e-studio 2000ac Safety Information Manual

 When using the Multifunctional Digital Systems
 Do not take off the cover of the equipment; otherwise you could be injured or get an electric shock.
 Do not remove or connect the plug with wet hands, as this could give you an electric shock.
 Do not place any container with liquid (flower vases, coffee cups, etc.) on or near the equipment.
This could cause a fire or give you an electric shock.
 Keep paper clips and staples away from the air vent. If not, a fire could result or you could get an
electric shock.
 If the Multifunctional Digital Systems becomes excessively hot, smoke comes out of it or there is an
odd smell or noise, proceed as follows.
Turn the main power switch OFF and remove the plug from the outlet, then contact your service
representative.
 If the Multifunctional Digital Systems will not be used for more than one month, remove the plug
from the outlet for safety purposes during that time. If an insulation failure occurs, this could cause
a fire or give you an electric shock.
 Do not touch any portions other than those specified in the Operator's Manual. This could cause a
malfunction, or you could get an electric shock, be injured or burned.
 Do not place heavy objects (4 kg/9 lb. or more) on the original glass and do not press on it with force.
Breaking the glass could cause personal injury.
 Do not place heavy objects (4 kg/9 lb. or more) on the Multifunctional Digital Systems. If the objects
fall off, this could cause injury.
 Do not touch the fuser unit or the metal area around it. Since they are very hot, you could be burned
or the shock could cause you to injure your hand in the machine.
 Be careful not to let your fingers be caught when closing the drawer. This could cause an injury.
 Be careful not to let your fingers be caught between the equipment and the duplexing unit or
automatic duplexing unit. This could cause an injury.
 Do not touch the metal portion of the guide plate in the duplexing unit or automatic duplexing unit
as it could burn you.
 Do not touch the hinge (= a connecting part) on the rear side of the Reversing Automatic Document
Feeder. This could catch and injure your fingers when you open or close the Reversing Automatic
Document Feeder.
 Always keep hands and fingers clear of the finisher tray hinge, as the tray could move unexpectedly.
Failure to do so could result in injury to your hand and/or fingers.
 Do not use the pulled out drawers as steps. This could injure you if you fall.
 When changing the angle of the control panel, be careful not to catch your hands in the gap between
the equipment and the control panel. This could cause personal injury.
Safety Information 17