Table of Contents
Advertisement
2.4.3 Network
Set the DVR network parameters in "Network" interface. The default IP address is
192.168.1.88
Base setting
【DHCP】Enable the DVR to obtain an IP address automatically. If this is enabled, the
DVR will reboot and search for a DHCP server, and then assign a dynamic IP address.
The dynamic IP address will be displayed in the menu. Enter a static IP address if there
is no DHCP service available. If you are using the advanced feature PPPOE, then the
IP/mask/gateway and DHCP are unable to be changed.
【IP Address】use（）or input numbers to modify IP, then set 【subnet mask】
and 【default gateway】for this IP.
【First DNS Server】DNS server IP.
【Alternate DNS Server】DNS alternate IP
【Physical Address】physical address of current net port
Advanced
© Copyright QVIS Home ®. All documentation rights reserved.
21
Advertisement
Table of Contents
