Table of Contents
Advertisement
Snapshot Mode:
Trigger capture: Capture picture when alarm has been triggered.
1.
Timing capture: set how frequently you wish a snapshot is to be taken.
2.
Picture Size: CIF.
Picture Quality: 6 levels
Snapshot Rate: Set a capture rate for the single channel.
【More Configuration】Enter the following interface:
【Channel Name Display】Choose to either show the channel name on the screen or
not.
【Date Display】Show the date on screen or not
【Channel Display】Drag a channel title and save instantly. After quitting by using the
right mouse button, the position of channel title will not vary in displayer or in the
monitor (varied position can be shown in the recorder and the WEB interface).
【Time Display 】Drag the time title and save instantly. After quitting by right button,
the position of time title will not vary in displayer or in the monitor (varied position can
be shown in the recorder and WEB interface).
【Video Cover】4 zones preview and display protect. Set what areas on the video
image from the camera you wish to mask out so it does not show on the recorded
footage.
【Preview】Set the masking zone. Masking zone is shown on the screen when
displayed but will not be fully set in the recorded footage unless saved.
【Monitor】Set masking zone. Masking zones are shown in the screen when
displaying or recording.
© Copyright QVIS Home ®. All documentation rights reserved.
19
Advertisement
Table of Contents
