1.9.2 Operation Icons
: Not selected.
: Selected.
: The drop - down button
:Leave the interface.
:Cancel the settings.
:Set parameters.
:Save parameters
:Restore the factory settings.
:Apply current settings to the system.
:Copy current settings to other channels.
:Enter the configuration interface.
:Select and configure the processing operation triggered by video
detection or alarm.
1.10
The Real-time Browser
There are date, channel name, record icon and alarm status icon in each real-time
monitoring screen. Switch screens by the front panel, a remote control or a mouse.
If screen prompts of external alarm, video loss, occlusion detection, dynamic detection,
network connection and IP conflict is set, the following interface will pop up when the
relevant alarm occurs.
© Copyright QVIS Home ®. All documentation rights reserved.
9