Installing The Start Number Plate; Removing The Front Fender; Installing The Front Fender - Husqvarna 2014 FC 450 EU Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.17

Installing the start number plate

11.18

Removing the front fender

11.19

Installing the front fender

–
Position the start number plate. Mount and tighten screw
Guideline
Remaining screws, chassis
The holding lugs engage.
–
Position brake line
B01875-10
Preparatory work
–
Remove the start number plate. (
Main work
–
Remove screws
B01876-10
Main work
–
Position the front fender. Mount and tighten screws
Guideline
Remaining screws, chassis
B01876-10
Finishing work
–
Install the start number plate. (
M6
2 in the brake line guide.
p. 38)
1 and 2 . Remove the front fender.
M6
p. 39)
1
.
10 Nm (7.4 lbf ft)
1 2
and .
10 Nm (7.4 lbf ft)
39