Service Work On The Chassis; Raising The Motorcycle With A Lift Stand; Removing The Motorcycle From The Lift Stand; Bleeding The Fork Legs - Husqvarna 2014 FC 450 EU Owner's Manual

11

SERVICE WORK ON THE CHASSIS

11.1

Raising the motorcycle with a lift stand

Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
11.2

Removing the motorcycle from the lift stand

Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
1 0 0 1
11.3

Bleeding the fork legs

–
Raise the motorcycle at the frame below the engine.
The wheels should no longer touch the ground.
–
Secure the motorcycle against falling over.
Lift stand (81329955000)
401942-01
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, insert plug-in stand
dle.
Info
Remove the plug-in stand before riding.
402001-10
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Release bleeder screws
Any excess pressure escapes from the interior of the fork.
–
Tighten the bleeder screws.
B01848-10
Finishing work
–
Remove the motorcycle from the lift stand. (
1
into the left side of the wheel spin-
p. 32)
1
.
p. 32)
32