Substances - Husqvarna 2014 FC 450 EU Owner's Manual

23

SUBSTANCES

Brake fluid DOT 4 / DOT 5.1
Standard/classification
–
DOT
Guideline
–
Use only brake fluid that complies with the specified standard (see specifications on the container) and that possesses the corre-
sponding properties.
Coolant
Guideline
–
Use only suitable coolant (even in countries with high temperatures). Using inferior antifreeze can result in corrosion and foaming.
–
Use only coolant based on ethylene glycol.
Mixture ratio
Antifreeze protection: −25... −45 °C (−13...
−49 °F)
Coolant (mixed ready to use)
Guideline
–
Use only coolant based on ethylene glycol.
Antifreeze protection
Engine oil (SAE 10W/50)
Standard/classification
–
JASO T903 MA ( p. 93)
–
SAE ( p. 93) (SAE 10W/50)
Guideline
–
Use only engine oils that comply with the specified standards (see specifications on the container) and that possess the correspond-
ing properties.
Synthetic engine oil
Fork oil (SAE 4) (48601166S1)
Standard/classification
–
SAE ( p. 93) (SAE 4)
Guideline
–
Use only oils that comply with the specified standards (see specifications on the container) and that possess the corresponding
properties.
Shock absorber oil (SAE 2.5) (50180342S1)
Standard/classification
–
SAE ( p. 93) (SAE 2.5)
Guideline
–
Use only oils that comply with the specified standards (see specifications on the container) and that possess the corresponding
properties.
Super unleaded (ROZ 95/RON 95/PON 91)
Standard/classification
–
DIN EN 228 (ROZ 95/RON 95/PON 91)
Guideline
–
Only use unleaded super fuel that matches or is equivalent to the specified fuel grade.
–
Fuel with an ethanol content of up to 10 % (E10 fuel) is safe to use.
Info
Do not use fuel containing methanol (e. g. M15, M85, M100) or more than 10 % ethanol (e. g. E15, E25, E85, E100).
50 % corrosion inhibitor/antifreeze
50 % distilled water
−40 °C (−40 °F)
91