12
BRAKE SYSTEM
–
Insert the new brake linings, insert pin
Info
Always change the brake linings in pairs.
Info
Make sure that the decoupling plate
brake lining.
–
Operate the foot brake lever repeatedly until the brake linings are in contact with the
brake disc and there is a pressure point.
B01905-10
–
Add brake fluid to level
Brake fluid DOT 4 / DOT 5.1 (
–
Mount and tighten screw cap
Info
Clean up overflowed or spilt brake fluid immediately with water.
B01903-10
4
, and mount cotter pins
7
is mounted on the piston side of the
A
.
p. 91)
1
2
with membrane
3
.
and the O-ring.
63