Precor C842i Service Manual page 35

Diagram 7.6 - Seat Bottom
8. Disconnect the external hand held heart rate cable from the internal hand held heart rate
cable.
9. If only the external cable is being replaced, skip to step 14. If the internal cable is being
replaced continue with step 10.
10. Remove the screws retaining the hand held heart rate contact plates from both the left and
right seat handlebars. Disconnect the cable from all four hand held heart rate contact plates.
Draw the internal cable out of the bottom of the seat.
11. Feed the replacement internal hand held heart rate cable into the seat. The cable with the
blue tape will feed into the right handlebar and the cable with the black tape will feed into the
left handlebar. See Diagram 7.7.
Diagram 7.7 - Internal Hand Held Heart Rate Cable
Blue Tape
C842i, C846i Upright and Recumbent Cycle
Cable
Cover
Black Tape
Page 35