17. SET COOL DOWN TIME display. Press the OK key.
18. Use the
,
keys to select the cool down time.
19. Press the BACK key to exit the set cool down time display.
20. SET RESISTANCE RANGE display. Press the OK key.
keys to select to HIGH, MEDIUM or LOW resistance range.
21. Use the
,
22. Press the BACK key to exit the set resistance range display.
23. SET CUSTOM PROGRAM display. Allows programing of the custom program. Follow the
instructions scrolling on the display to program the custom course. Use the ENTER key to
save changes and exit or the BACK to exit without saving changes.
C842i, C846i Upright and Recumbent Cycle
Page 12