Zcv3622 / Zcvrb3622 Uhs Box / Component Locations - Marquis ZCV3622 SOLARA Installation Instructions Manual

ZCV3622 / ZCVRB3622
Included with base model IPI units.
The UHS Box is designed for in-unit installation of the IPI Module, Battery Backup, and optional Remote Receiver.
Batteries can be changed through the front access area.
Access Area
IPI SYSTEM 1
IPI Module
NOTE: BATTERY BACKUP PACK IS NOT REQUIRED IF REMOTE RECEIVER IS USED
If Lower Panel has been covered, batteries may be changed through the Access Area, but burner pan must be removed
to service or replace components (See Burner Pan Removal section of this manual).
COMPONENT LOCATIONS
NOTE: The gas line
connection may be made of
1/2" rigid pipe or an
Approved Kingsman Flex
Connector, such as
FP15GC. Since some
municipalities have
additional local codes, it is
always best to consult your
local authorities and the
current CAN/CGA - B149.1
or .2 installation code in
Canada or the National
Fuel Gas code ANSI
Z223.1 in the U.S.A
UHS Box
UHS Box
Cold
Climate
Switch
Battery Backup
Optional Remote Receiver
(See Each Section For Connections & Wiring)
Fan
Junction
Box
GAS
ULK Transformer
MILLIVOLT SYSTEM
Optional Remote Receiver
IPI SYSTEM 2
IPI Module
UHS Box
Valve
DCHS
Cold
Climate
Switch
Battery Backup
Optional Remote Receiver
Power
Control
Module
Vent
39