Operating The Receiver Without Batteries For Gt / Egt / Gtm / Egtm Remote Controls - Marquis ZCV3622 SOLARA Installation Instructions Manual

-Wiring Harness P/N 1002-P906si required.
-Millivolt Systems will also require Power Adapter P/N 1002-P850si.
The Remote Receiver & IPI or Millivolt system can be powered by the AC Adapter. This is advantageous if you do not
want to use batteries. Simply connect the AC Adapter into the Remote Control Wiring Harness as per the diagrams below.
IPI System EGTM
Millivolt System GTM
Receiver Module
0.584.523/521/221
1001-P221SI
EGTM / GTM System -No Batteries
Receiver Module
0.584.523/521/221
1001-P221SI
32