Level 1 Menu - Display Menu - Kaco Powador 2500xi Operating Instructions Manual

S e ctio n 4 · O pera ti on

4.4 Level 1 menu - Display menu

The display menu is displayed once the Powador inverter has
started up. Measured values and all of the meters are dis-
played here. Key "1" is used to navigate through the individual
menu items.
Inverter type display
Start at 410 V
Generator voltage (V) and current (A)
Line voltage (V), current (A) and power (W)
Daily peak capacity
Temperature inside
Counter yield (clear using key "2")
Yield today
Total yield
(Total) economy of CO
Counter oper. hours (clear with key "2")
Operating hours today
Total operating hours
Figure 4.4: Display mode menu
"Counter yield" and "Counter oper. hours" can be cleared separately from the other meters. When "Counter yield" or "Counter
oper. hours" is displayed, you can reach the "Clear counter?" display by pressing key "2". Key "2" must now be used to select "yes". Press
key "1" to confi rm the clearing. The display jumps back to the meter that was cleared. "Counter yield" and the "Counter oper. hours"
are always cleared together. Therefore, clearing one meter suffi ces to clear both.
Page 8
2
Powador 2500xi / 3600xi / 4000xi / 4500xi / 5000xi
The inverter waits until the voltage exceeds 410 V. One minute later,
the grid feed begins.
The current voltage and current of the solar generator connected to
the inverter.
The current line voltage, line current and the power that is currently
being fed into the grid.
The current day's peak power (in watts) that was fed into the grid
over a short time.
A display of the current temperature inside the unit, in °C. The
inverter limits the grid feed power depending on the temperature of
the semiconductors.
This meter totals all yields until it is reset again. The customer can
confi gure the time periods for this meter, e.g. as a monthly meter.
The power that has been fed into the grid on the current day in watt-
hours (Wh).
The power that has been fed into the grid since start-up of the
inverter.
Shows the CO savings of this PV installation compared to the
2
German electricity mix. The CO
yield meter and can also be cleared with this meter.
The customer can confi gure the time periods for this meter, e.g. as
a monthly meter. The procedure for resetting meters is explained at
the bottom of the page.
Today's hours of operation. As soon as the inverter is in standby
mode (i.e. when LED (1) lights up), the running time is added up.
Hours of operation since start-up of the inverter. As soon as the
inverter is in standby mode (i.e. when LED (1) lights up), the running
time is added up.
Explanation of the menu items in display mode
Operating Instructions Powador 2500xi / 3600xi / 4000xi / 4500xi / 5000xi_EN
savings are calculated from the total
2