Contacts and Settings
static NAT settings screen (Page 105). For
details, contact your network administrator.
5.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
6.
Use [
][
] to select "Yes" and press [Enter].
•
The select local site screen is displayed.
7.
Press [Home].
•
The Home screen is displayed.
Selecting a Local Site
1.
Press [Menu].
•
The Menu screen is displayed.
2.
Use [
][
] to select "Select local site" and
press [Enter].
•
The select local site screen is displayed.
3.
Use [
][
] to select the local site you want to use.
Note
•
For the currently selected local site,
"
" is displayed in "Selected".
•
"Not Registered" is displayed for sites that
have not been registered.
•
When "SIP" is set to "OFF" on the call type
settings screen (Page 102), you cannot
select a local site whose SIP server settings
have been enabled. You also cannot select
a local site whose gatekeeper settings have
been enabled if "H.323" is set to "OFF".
114
User Manual
4.
Press [G].
•
A dialogue box to confirm the temporary use of
the selected local site is displayed.
5.
Use [
][
] to select "Yes" and press [Enter].
•
The Home screen is displayed.
Note
•
When you select a local site, the name entered
in "Local site name" is displayed instead of the
unit name in the unit information.
•
If you turn the power off and then back on, the
local site is returned to the site set on the system
settings screen.
•
To return to the site set on the system settings
screen, turn off the power and then turn it back
on, or use the following procedure:
1.
Repeat steps 1–2.
2.
Use [
][
selected local site.
3.
Press [Y].
•
A dialogue box to confirm whether you
want to return to the site set on the
system settings screen is displayed.
4.
Use [
][
[Enter].
•
The Home screen is displayed.
Editing Local Site Information
1.
Press [Menu].
•
The Menu screen is displayed.
2.
Use [
][
] to select "Select local site" and
press [Enter].
•
The select local site screen is displayed.
3.
Use [
][
] to select the local site you want to edit.
] to select the currently
] to select "Yes" and press