Installing Additional Servers - HP IBRIX X9000 Installation Manual

A configuration script now performs some tuning and imports the LUNs into the X9000 software.
7. If the bond0/cluster network is not routed and the bond1/user network is routed, complete
the following steps to define the default gateway for bond1:
Set the default gateway in /etc/sysconfig/network.
Add a default route for bond1:
ibrix_nic -r -n IFNAME -h HOSTNAME -A -R ROUTE
For example:
# ibrix_nic -r -n bond1 -h ibrix02a -A -R 10.10.125.1
8. If you want to be able to access the FM through the bond1/user network, create a management
VIF for bond1:
ibrix_fm -c <VIF IP address> -d <VIF device> -n <VIF netmask> -V
<VIF type>
For example:
# ibrix_fm -c 10.10.125.101 -d bond1:1 -n 255.255.255.0 -v user
The installation is complete on the first server.

Installing additional servers

Complete the following steps:
1. Using a console connection, log into the server you are installing.
2. The Set IP or Discover FMs dialog box appears. Select Discover Existing Clusters to join them
from this console.
Completing the installation in text mode — separate cluster and user networks 23