HP IBRIX X9000 Installation Manual page 30

When you select Ok, the Configure Network dialog box reappears. Select bond1, and then
select Configure. The Edit Bonded Interface dialog box is displayed. Enter the IP address and
netmask for bond1, specify any bond options, and change the slave devices if necessary.
12. The Configuration Summary dialog box lists the configuration you specified. Select Commit
to apply the configuration.
13. The wizard registers a passive Fusion Manager on the server, and then configures and starts
it.
14. If necessary, complete the bond1 configuration on the server:
If the bond0/cluster network is not routed and the bond1/user network is routed, set the
default gateway in /etc/sysconfig/network.
On the active FM, set the default route for bond1:
ibrix_nic -r -n <bond> -h <hostname> -A -R <route>
For example:
ibrix_nic -r -n bond1 -h ibrix02a -A -R 10.10.125.1
The installation is complete.
30 Installing X9300 and X9320 systems