Table of Contents
Advertisement
On the Edit Bonded Interface dialog box, enter the IP address and netmask and specify any
bond options. The slaves are selected by the system based on the following preference:
10G dual port PCI add-on card
1G quad port PCI add-on card
Embedded server network ports
Change the slave devices as necessary for your configuration.
When you select Ok, the Configuration Summary dialog box appears. Select Back and return
to the Network Configuration dialog box.
3.
Set up bond1. On the Network Configuration dialog box, select <Add Device>.
20
Installing X9300 and X9320 systems
Advertisement
Table of Contents
Troubleshooting
