Otto Bock B600 Instructions For Use Manual page 61

After the attendant control has been switched on, the LCD
monitor on the control panel shows the following informa­
tion:
Display Information
Attendant control activated
Battery Capacity (LED indicator)
The LED lights up when the unit is on.
Colour and flash codes provide information on the current
battery capacity:
LED Information
Green is lit Battery capacity > 70%
Orange is lit Battery capacity 30% – 70%
Red is lit Battery capacity < 30%
Red is flashing Battery deep discharge
Charge as soon as possible
Green is flashing Battery over-voltage (e.g. after driv­
ing downhill)
Continue driving slowly
Red/Orange/Green Charging process/Drive-away lock
flashing alternately
B600
[Mode] Button
Switch between speed level 1 and 2 by pressing the button
briefly.
Push and hold the button (at least 2 seconds) to switch the
control unit to the power seat functions.
Mode (LED indicator)
The LED has 3 colour and various flash codes to indicate
the statuses of the speed level and system faults:
LED
Green is lit
Orange is lit
Red is flashing
Off
Selected Power Seat Function (LED indicator)
The electric seat functions are accessed by pressing and
holding the "M" button (approx. 2 seconds).
The currently selected seat function is indicated on the con­
trol panel display (see Page 41 ff.) and by the following
LEDs on the attendant control:
Display Information
Power back angle adjustment
Usage
Information
Speed level 1
Speed level 2
Fault (see Page 87)
LED indicator switched to
seat function
Ottobock | 61